We are professional factory on making all electronics components based on Arduino and Raspberry Pi. And we also have processional engineer team to offer you tutorials which you can start from beginning. We have all documents( including code) For all kits from Kuman,Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.
Key Features:
● 5 inch resistive touch screen designed for Raspberry Pi 3 2 Model B RPi 1 B B+ A A+, can't work for Raspberry Pi Zero board.
● The Module used SSD1963 LCD controller with 5 inch LCD module with touchpad. Job stability of the module with super anti-jamming capability,far beyond driven solutions on the market SSD1963 , SSD1963 interference poor, black and white with crash risk .
● This LCD has a superior display quality and super wide viewing angle,it using 8080 timing sequence with 16bit parallel bus interface, resolution 800 × 480, 16M colours display panel.
● The LCD has a SD slot, SPI flash footprint. It's pinout is pin to pin compatible with TFT Shield for arduino MEGA 2560.The TFT LCD Module has embedded Font IC, which contain fonts of 10 sizes and 236 icons.With this LCD module, you will be able to draw bigger and nicer fonts, and also extended ASCII characters too.
● For Raspberry Pi user, 5" inch TFT LCD Display Module is compatible with Raspberry Pi 3 2 Model B RPi 1 B B+ A A+ ,Detailed tutorials including project introduction and drives CAN BE PROVIDED FOR FREE,contact us BY Email to get documents
Specifications:
1)5.0" TFT LCD Module, Resolution 800x400, SSD1963 Controller
2)LCD Type: TFT Transmissive Normal White super wide viewing angle
3)LCD Panel: HannStar HSD050IDW1
4)Interface: 8/16bit parallel bus interface
5)PCB Color: Blue
6)On board DC-DC Boost regulator TPS61040 to provide power supply to LCD backlight
7)With SD Cage and Flash IC footprint reserved
8)LCD-specificed intialization code is provided, so that you can save time to optimize power control register and gamma curves for best display performance. We have test the provided code, it gives the best display performanace
9)Module dimension: 133mmx85mmx23mm(including pin header extrusion)
10)Active Area: 108mmx65mm
12)Pixel pitch: 0.135mmx0.135mm
13)Standard 2x20 2.54mm pin header for connection to MCU/development board
14)Module weight: 170grams
Package Contains:
5inch HDMI LCD x 1
HDMI adaptor x 1
Touch pen x 1
USB type A plug to micro B plug cable x 1
RPi screws pack (4pcs) x 1
NOTE:
1.can't work for Raspberry Pi Zero board
2.Power Supply is NOT included.
3.There is a sticker on the LCD screen. Please peel off before use.
Please be aware that due to your computer monitor display the color may have some difference between the picture and the physical item
Please according to you to buy the dress fabric, select the corresponding fabric color chart
USD
EUR
GBP
JPY
CNY
SAR
SGD
NZD
ARS
INR
COP
AED
